{
    "dashboard" : "Dashboard",
    "configure" : "konfigurieren",
    "easy_steps" : "Easy Steps",
    "port" : "Port",
    "ports" : "Ports",
    "vlan" : "VLAN",
    "dynamic_acl" : "Dynamische ACL",
    "accounts" : "Accounts",
    "monitoring" : "Überwachung",
    "event_log" : "Event Log",
    "system" : "System",
    "top_ports" : "Top Ports",
    "quality_of_service" : "Quality of Service",
    "session" : "Session",
    "help" : "Hilfe",
    "support_center" : "Support Center",
    "documents" : "Dokumente",
    "logout" : "abmelden",
    "toggle_navigation" : "Toggle navigation",

    "save_config" : "Konfiguration sichern",
    "loading" : "Laden ....",
    "account" : "Account",
    "device" : "Gerät",
    "ip_address" : "IP Adresse",
    "security" : "Sicherheit",
    "summary" : "Zusammenfassung",
    "user_name" : "Benutzername",
    "new_password" : "neues Passwort",
    "password" : "Passwort",
    "enter_valid_password" : "Geben Sie ein gültiges Passwort ein (max. 32 Zeichen).",
    "passwords_must_match" : "Passwörter müssen übereinstimmen.",
    "setup_device" : "Geräte Einstellung",
    "name" : "Name",
    "valid_device_name" : "Geben Sie einen gültigen Geräte nahmen ein (Max. 32 Zeichen).",
    "sys_location" : "Lokation",
    "location" : " Lokation ",
    "enter_valid_location" : "Geben Sie eine gültige Lokation ein (max. 255 Zeichen).",
    "contact" : "Kontakt",
    "enter_valid_email" : "Geben Sie eine gültige E-Mail-Adresse ein.",
    "assign_ip_address" : "IP-Adresse zuweisen",
    "default_vlan" : "Default VLAN",
    "enter_valid_ip_address" : "Geben Sie eine gültige IP-Adresse mit dem Format xxx.xxx.xxx.xxx oder xxx.xxx.xxx.xxx/yy (für die Maske ) ein.",

    "management_vlan" : "Management VLAN",
    "warning" : "Warnung",
    "without_ip_address" : "Ohne Zuweisung eine IP-Adresse zu mindestens einem WLAN geht die Verbindung zum Switch verloren ",
    "security_options" : "Sicherheitsoptionen",
    "telnet_support" : "Telnet Unterstützung",
    "telnet_is_enabled" : "Telnet ist standardmäßig aktiviert. Telnet ist nicht verschlüsselt und bringt damit ein signifikantes Risiko mit sich.",
    "enable" : "Einschalten",
    "enabled" : "Eingeschaltet",
    "disable" : "Ausschalten",
    "disabled" : "Ausgeschaltet",
    "cancel" : "Abbruch",
    "apply" : "Übernehmen",
    "back" : "Zurück",
    "snmp_support" : "SNMP Support",
    "snmp_access_enabled" : "SNMP Zugriff ist standardmäßig eingeschaltet.  SNMP nutzt keine Verschlüsselung. SNMPv3 beseitigt dieses Risiko.",
    "failsafe_access" : "Failsafe Account Access",
    "enable_failsafe_account" : "Would you like to enable failsafe account access via the management port?",
    "mgmt_vlan" : "Mgmt VLAN",
    "security_option" : "Sicherheitsoption",
    "telnet_access" : "Telnet Zugriff",
    "snmp_access" : "SNMP Zugriff",

    "slot_information" : "Slot Information",
    "slot_location" : "Slot_Location",
    "blade_type" : "Modultyp",
    "slot_location" : "Slot Location",
    "state" : "Status",
    "number_of_ports" : "Anzahl der Ports",
    "temperature" : "Temperatur",
    "part_info" : "Part Info",
    "boot_rom" : "BootROM",
    "soft_build" : "Software Branch",
    "software_version" : "Software Version",
    "primary_image" : "Primäres Image",
    "secondary_image" : "Sekundäres Image",
    "image_selected" : "ausgewähltes Image ",
    "config_selected" : "Config Selected",
    "identify_card" : "Identify Card",

    "slot_topology_information" : "Slot Topology Information",
    "slot_number" : "Slot Nummer",
    "role" : "Rolle",
    "priority" : "Priorität",
    "auto" : "Auto",
    "master_capable" : "Master-Capable",
    "active_enabled" : "Active Enabled",
    "stack_mac_address" : "Stack Mac Adresse",
    "blade_mac_address" : "Blade Mac Adresse",
    "alt_ip_address" : "Alternative IP-Adresse",
    "alt_gateway" : "Alternativer Gateway",
    "port_1_detail" : "Port 1 Detail",
    "port_2_detail" : "Port 2 Detail",

    "new_policy_name" : "Neuer Policy Name",
    "required_field" : "Pflichtfeld.",
    "invalid_format" : "Kein gültiges Format.",
    "basic" : "Basic",
    "advanced" : "Advanced",
    "match_conditions" : "Match Conditions",
    "ethernet" : "Ethernet",
    "type" : "Typ",
    "mac_address" : "MAC Addresse",
    "source_filter" : "Source Filter",
    "enter_valid_mac_address" : "Geben Sie eine gültige Mac Adresse im Format xx:xx:xx:xx:xx:xx oder xx:xx:xx:xx:xx:xx/yy:yy:yy:yy:yy:yy (mit Maske) ein.",
    "dest_filter" : "Dest Filter",
    "other" : "Andere",
    "protocol" : "Protokoll",
    "invalid_format" : "ungültiges Format.",
    "tcp_flags" : "TCP Flags",
    "source_ip" : "Source IP",
    "address_filter" : "Address Filter",
    "port_filter" : "Port Filter",
    "enter_valid_port" : "Geben Sie einen gültigen Port an.",
    "destination_ip" : "Destination IP",
    "address_filter" : "Addressfilter",
    "igmp" : "IGMP",
    "igmp_type" : "IGMP Typ",
    "needs_to_be_hex" : "Format muss Hexe dezimal (0x12) oder numerisch sein",
    "icmp" : "ICMP",
    "icmp_type" : "ICMP Typ",

    "needs_to_be_number" : "Format muss numerisch sein.",
    "icmp_code" : "ICMP Code",
    "actions" : "Aktionen",
    "permit" : "Erlauben",
    "deny" : "Verweigern",
    "action_modifiers" : "Action Modifiers",
    "log" : "Log",
    "log_raw" : "Log-raw",
    "mirror" : "Spiegel",
    "mirror_cpu" : "Spiegel-CPU",
    "counter" : "Zähler",
    "invalid_string" : "ungültige Zeichenkette.",
    "byte_counter" : "Byte Zähler",
    "pkt_counter" : "Pkt Zähler",
    "meter" : "Bandbreitenbegrenzung",
    "qos_profile" : "QoS Profil",
    "redirect_ipv4" : "Umleitung IPv4",
    "redirect_port" : "Umleitung Port",
    "redirect_port_list" : "Umleitung Portliste ",
    "redirect_port_no_sharing" : "Redirect Port No Sharing",
    "redirect_name" : "Redirect Name",
    "replace_dscp" : "Replace-dscp",
    "replace_dot1p" : "Replace-dot1p",
    "replace_dest_mac_addr" : "Replace Dest Mac Addr",
    "fill_in_required_field" : "Bitte füllen Sie die Pflichtfelder aus!",

    "create_new_user" : "neuen Benutzer anlegen",
    "exceeds_max_length" : "Maximale Länge überschritten.",
    "re_enter_password" : "Passwort wiederholen",
    "read_only" : "Read-Only",
    "read_write" : "Read-Write",
    "access_permission" : "Zugriffsfreigabe",
    "fix_input_error" : "bitte korrigieren Sie den Eingabefehler.",
    "create_vlan" : "VLAN erstellen ",
    "vlan_name" : "VLAN Name",
    "tag" : "Tag",
    "description" : "Beschreibung",
    "command_error" : "Kommando Fehler",

    "system_info" : "System",
    "version" : "Version",
    "vlans" : "VLANs",
    "power_and_cooling" : "Stromversorgungen und Kühlung",
    "power_supplies" : "Stromversorgungen",
    "fans" : "Liste",
    "poe_ports" : "PoE Ports",
    "total_counts" : "Gesamtzähler",
    "errors" : "Fehler",
    "warnings" : "Warnungen",
    "top5_ports" : "Top 5 Ports",
    "recent_events" : "Letzte Meldungen",
    "critical" : "kritisch",
    "warnings" : "Warnungen",
    "blades" : "Module",
    "unit" : "Unit",
    "status" : "Status",
    "temp" : "Temp.",
    "last5_error_events" : "Letzte fünf Meldungen",
    "no_error_events" : "das aktuelle Lok enthält keine Fehler Meldungen.",

    "acl_rule" : "ACL Regel",
    "general" : "General",
    "rule_name" : "Regel Name",
    "if" : "Wenn",
    "enter_rule_conditions" : "Geben Sie die Regel Bedingungen ein...",
    "then" : "Dann",
    "enter_rule_bindings" : "Geben Sie die Regelbindungen ein...",
    "restore" : "Wiederherstellen",
    "delete" : "Löschen",

    "poe_port" : "PoE Port",
    "display_string" : "Anzeige String",
    "not_set" : "(nicht gesetzt)",
    "inline_power" : "Inline Power",
    "on" : "An",
    "off" : "Aus",
    "class_str" : "Klasse",
    "volts" : "Volt",
    "current" : "Strom",
    "power" : "Power",
    "no_fault" : "kein Fehler",
    "port_details" : "Port Details",
    "working" : "arbeitet ....",

    "qos" : "QoS",
    "port_number" : "Port Nummer",
    "auto_negotiation" : "Auto Negotiation",
    "speed" : "Speed",
    "duplex" : "Duplex",
    "virtual_router" : "Virtueller Router",
    "port_state" : "Port Status",
    "link_state" : "Link Status",
    "link_counter" : "Link Zähler",
    "elsm" : "ELSM",
    "edp" : "EDP",
    "qos_traffic_grouping_config" : "Explicit CoS Traffic Grouping Config",
    "ingress_iptos_examination" : "Ingress IPTOS Examination",
    "ingress_8021p_examination" : "Ingress 802.1p Examination",
    "examination" : "Examination",
    "inner_exam" : "Inner Exam",
    "egress_iptos_replacement" : "Egress IPTOS Replacement",
    "egress_8021p_replacement" : "Egress 802.1p Replacement",
    "egress_traffic_rate_limiting" : "Egress Traffic Rate Limiting",
    "egress_port_rate" : "Egress Port Rate",
    "no_limit" : "No Limit",
    "max_burst_size" : "Max Burst Size",
    "broadcast_rate" : "Broadcast Rate",
    "multicast_rate" : "Multicast Rate",
    "unknown_destination_mac_rate" : "Unknown Destination MAC Rate",
    "fdb_vlan" : "FDB and VLAN",
    "learning_port" : "Learning Port",
    "flooding" : "Flooding",
    "unicast_flooding" : "Unicast Flooding",
    "multicast_flooding" : "Multicast Flooding",
    "broadcast_flooding" : "Broadcast Flooding",
    "member_vlans" : "Mitglieds-VLANs",

    "switch_information" : "System",
    "switch_detail" : "System Details",
    "inventory" : "Inventar",
    "system_name" : "System Name",
    "system_type" : "System Typ",
    "switch_time" : "Switch Zeit",
    "boot_time" : "Boot Zeit",
    "system_uptime" : "System Uptime",
    "next_reboot" : "Next Reboot",
    "current_state" : "momentaner Zustand",
    "image_booted" : "Image Booted",
    "primary_version" : "Primäre Version",
    "secondary_version" : "Sekundäre Version",
    "config_booted" : "Config Booted",
    "syshealth_check" : "SysHealth Check",
    "recovery_mode" : "Recovery Mode",
    "system_watchdog" : "System Watchdog",
    "license" : "Lizenz",
    "turn_on_led" : "LED einschalten",
    "turn_off_led" : "LED ausschalten",
    "reboot_switch" : "Switch neustarten",
    "serial_number" : "Seriennummer",
    "boot_rom_version" : "Boot ROM Version",
    "image_version" : "Image Version",
    "switch" : "Switch",
    "slot" : "Slot",

    "assign_ports" : "Ports zuweisen",
    "admin_state" : "Admin State",
    "tag_type" : "Tag Type",
    "active_ports" : "Aktive Ports",
    "ipv4_forwarding" : "IPV4 Forwarding",
    "loopback" : "Loopback",
    "tagged_ports" : "Tagged Ports",
    "untagged_ports" : "Untagged Ports",
    "primary_ip" : "Primäre IP",
    "ipv6_address" : "IPV6 Adresse",
    "dhcp_address_from" : "DHCP Adresse von",
    "dhcp_address_till" : "DHCP Adresse bis",
    "default_gateway" : "Standard Gateway",
    "dns_server" : "DNS Server",
    "wins_server" : "WINS Server",
    "lease_time" : "Lease Time",
    "dhcp_ports" : "DHCP Ports",
    "available_ports" : "Verfügbare Ports",
    "add_tagged" : "Tagged hinzufügen ",
    "add_untagged" : "Untagged hinzufügen ",
    "remove" : "Entfernen",
    "enable_dhcp_ports" : "DHCP Ports einschalten ",
    "both" : "Beides",
    "tagged" : "Tagged",
    "untagged" : "Untagged",
    "assigned_ports" : "zugewiesene Ports",

    "date" : "Datum",
    "time" : "Zeit",
    "severity" : "Severity",
    "event" : "Ereignis",

    "fan" : "Lüfter ",
    "number_of_fans" : "Lüfteranzahl",
    "revision" : "Revision",
    "odometer" : "Betriebstundenzähler",
    "not_available" : "(Nicht verfügbar)",
    "rpm" : "OPM",

    "dynamic_access_control_lists" : "Dynamische Access Control Lists",
    "create_policy" : "Policy erstellen",
    "no_access_control_lists" : "Auf diesem Switch wurden keine Access Control Listen gefunden.",
    "order" : "Reihenfolge",
    "rule_name" : "Regel Name",
    "applicaton" : "Applikation",
    "details" : "Details",

    "devices" : "Geräte",
    "topology" : "Topologie",
    "version_part_info" : "Version / Part Info",
    "days_in_service" : "Tage im Betrieb",
    "stacking_support_not_on" : "stecken ist nicht eingeschaltet.",
    "stack_state" : "Stackzustand",
    "flags" : "Flags",
    "stack_topology_is_a" : "Stack Topologie ist",
    "active_topology_is_a" : "Active Topology ist ",
    "not_active_topology" : "Dieser Switch ist nicht in einer aktiven Topologie.",

    "poe_port_list" : "PoE Port Liste",
    "no_power_over_ethernet_ports" : "es wurden keine PoE Ports auf diesem Switch gefunden. PoE ist möglicherweise nicht verfügbar oder deaktiviert.",
    "current_ma" : "Strom (mA)",
    "power_watts" : "Leistung (Watt)",

    "port_list" : "Port Liste",
    "no_ports_were_found" : "auf diesem Switch wurden keine Ports gefunden.",
    "load_sharing_algorithm_address_based" : "Load Sharing Algorithm ist adressbasiert",
    "broadcast_flooding_enabled" : "Broadcast Flooding eingeschaltet",
    "port_disabled" : "Port ausgeschaltet",
    "edp_enabled" : "EDP eingeschaltet ",
    "port_enabled" : "Port eingeschaltet ",
    "unicast_flooding_enabled" : "Unicast Flooding eingeschaltet ",
    "ratelimit_flood_traffic_loopback" : "Ratelimit Flood-traffic Loopback",
    "egress_tos_enabled" : "Egress TOS eingeschaltet ",
    "jumbo_frame_enabled" : "Jumbo Frame eingeschaltet ",
    "load_sharing_enabled" : "Load Sharing eingeschaltet ",
    "elsm_enabled" : "ELSM eingeschaltet ",
    "multicast_flooding_enabled" : "Multicast Flooding eingeschaltet ",
    "mac_learning_enabled" : "MAC Learning eingeschaltet ",
    "ingress_tos_enabled" : "Ingress TOS eingeschaltet ",
    "priority_replacement_8021p_enabled" : "802.1p Priority Replacement eingeschaltet ",
    "load_sharing_algorithm_port_based" : "Load Sharing Algorithmus ist Port basiert",
    "software_redundant_port_primary" : "Software redundant port (Primär)",
    "background_qos_monitoring_enabled" : "Background QOS Monitoring eingeschaltet ",
    "software_redundant_port_redundant" : "Software redundant port (Redundant)",
    "diffserv_replacement_enabled" : "Diffserv Replacement eingeschaltet",
    "v_man_enabled" : "vMAN eingeschaltet ",
    "link_speed" : "Link Speed",
    "duplex_mode" : "Duplex Mode",
    "auto_neg" : "Auto Neg.",

    "port_quality_service" : "Port Quality of Service",
    "bytes" : "Bytes",
    "packets" : "Pakete",
    "ingress" : "Ingress",
    "egress" : "Egress",
    "ingress_qos_not_available" : "Ingress QoS Daten sind auf diesem Switch nicht verfügbar.",
    "qp1" : "QP1",
    "qp2" : "QP2",
    "qp3" : "QP3",
    "qp4" : "QP4",
    "qp5" : "QP5",
    "qp6" : "QP6",
    "qp7" : "QP7",
    "qp8" : "QP8",

    "port_utilization" : "Port Nutzung",
    "percent" : "Prozent",
    "bytes" : "Bytes",
    "packets" : "Pakete",
    "receive_peak" : "Receive Peak",
    "receive" : "Receive",
    "transmit_peak" : "Transmit Peak",
    "transmit" : "Transmit",
    "receive_peak" : "Receive Peak",

    "sessions" : "Sessions",
    "id" : "ID",
    "user" : "Benutzer",
    "authentication" : "Authentisierung",
    "login_time" : "Loginzeit",

    "vlan_list" : "VLAN Liste",
    "create_vlan" : "VLAN erstellen ",
    "protocol_address" : "Protokolladresse",
    "ports_active_total" : "Active Ports insgesamt",

    "login" : "Login",
    "sign_in" : "Anmelden",

    "power_supply" : "Stromversorgung",

    "cpu_performance" : "CPU Performance",
    "process" : "Prozess",
    "t05s" : "% letzte 5 Sekunden",
    "t10s" : "% letzte 10 Sekunden",
    "t30s" : "% letzte 30 Kunden",
    "t01m" : "% letzte Minute",
    "t05m" : "% letzte 5 Minuten",
    "t30m" : "% letzte 30 Minuten",
    "t01h" : "% letzte Stunde",
    "tmax" : "Max %",
    "tuser": "Total User CPU Usage (secs)",
    "tsys" : "Total System CPU Usage (secs)",

    "user_list" : "Benutzerliste",
    "new_user" : "Neuer Benutzer",
    "password_expiry" : "Passwortablauf",
    "accounts_locked" : "gesperrte Accounts",
    "never" : "nie",

    "user_detail" : "Benutzer Detail",
    "basic_information" : "Basisinformationen",
    "locked" : "Gesperrt",
    "change_password" : "Passwort ändern",
    "new_password" : "neues Passwort",
    "confirm_password" : "Passwort bestätigen",
    "advanced_password_options" : "erweiterte Passwortoptionen",
    "max_age" : "Aaximales Alter (Tage)",
    "min_length" : "minimale Länge",
    "history_limit" : "History Limit",
    "character_validation" : "Zeichen Überprüfung",
    "lockout_login_failures" : "Sperrung bei Falscheingabe",
    "submit" : "Eingabe",
    "delete_user" : "Benutzer löschen",

    "password_policy" : "Passwort Policy",
    "radius" : "RADIUS",
    "tacacs" : "TACACS",
    "days_between_0_365" : "Geben Sie einen Zeitraum von 0-365 Tagen an",
    "enter_min_password_length" : "Geben Sie eine minimale Passwort länger an.",
    "number_between_0_10" : "Geben Sie eine Nummer zwischen null und zehn ein",
    "timeout" : "Timeout (Sekunden)",
    "enter_valid_number" : "Geben Sie eine gültige Zahl an.",
    "primary" : "Primär",
    "secondary" : "Sekundär",
    "enter_ip_address" : "Geben Sie eine gültige IP-Adresse an.",
    "enter_tcp_port" : "Geben Sie eine gültige TCP Port Nummer an.",
    "shared_secret" : "Shared Secret",
    "enter_string" : "Geben Sie eine gültige Zeichenkette an.",
    "client_ip_address" : "Client IP Adresse",
    "access_requests" : "Access Requests",
    "access_accepts" : "Access Accepts",
    "access_rejects" : "Access Rejects",
    "access_challenges" : "Access Challenges",
    "client_timeouts" : "Client Timeouts",
    "bad_authenticators" : "Bad Authenticators",
    "unknown_types" : "Unknown Types",
    "round_trip_time" : "Round Trip Time",
    "accounting" : "Accounting",
    "requests" : "Requests",
    "responses" : "Responses",
    "retransmits" : "Retransmits",
    "cli_authorization" : "CLI Authorization",

    "enter_valid_device_contact" : "Geben Sie einen gültigen Kontakt an.",
    "language" : "Sprache",
    "welcome_to" : "Willkommen bei",
    "edit" : "Edit",
    "next" : "Weiter",
    "this_will_enable_vlan" : "Dieses Kommando aktiviert VLAN ",
    "this_will_disable_vlan" : " Dieses Kommando die aktiviert VLAN ",
    "this_will_delete_vlan" : "dieses Kommando löscht VLAN",
    "login_failed" : "Anmeldung fehlgeschlagen.",
    "full" : "Full",
    "half" : "Half",
    "ingress" : "Ingress",
    "egress" : "Egress",
    "this_will_delete_user" : "Dieses Kommando löscht Benutzer",
    "failure" : "Fehler",
    "yes" : "Ja",
    "no" : "nein",
    "please_confirm" : "Bitte bestätigen",
    "want_to_continue" : "möchten Sie das wirklich?",
    "will_retry" : "wird in 3 Minuten erneut versucht",
    "device_not_reached." : "Gerät kann nicht erreicht werden.",

    "logout_msg" : "Sie wurden abgemeldet",
    "connection_failure" : "Verbindung Fehler",
    "re_connecting" : "Verbindung wieder aufnehmen...",

    "normal" : "Normal",
    "strict" : "Strict",
    "all" : "alle",
    "none" : "kein",
    "ignore" : "Ignorieren",
    "shutdown" : "Herunterfahren",
    "enabled_license_level" : "Freigegebene Lizenzstufe",
    "enabled_feature_packs" : "Freigegebenes Feature Pack",
    "none_scheduled" : "Nichts geplant",

    "days" : "Tage",
    "hours" : "Stunden",
    "minutes" : "Minuten",
    "seconds" : "Sekunden",

    "avb" : "Audio Video Bridging",
    "link_up_count" : "Link Up Count",
    "link_down_count" : "Link Down Count",
    "gptp" : "gPTP",
    "msrp" : "MSRP",
    "mvrp" : "MVRP",
    "active" : "Aktiv",
    "inactive" : "Inaktiv",
    "class_a" : "Class A",
    "class_b" : "Class B",
    "master" : "Master",
    "slave" : "Slave",
    "passive" : "Passiv",
    "boundary" : "Boundary",
    "license_key" : "Lizenzschlüssel",

    "management_gateway" : "Gateway",
    "patents": "Patente",

    "foo" : "Bar",

    "configure_chalet" : "Chalet",
    "github_url" : "Extreme Networks on GitHub",
    "github_apps_url" : "EXOS Apps"
}